Product Name:
High Voltage Cluster LiFePO4 102.4V 100Ah 51.2KWH
Highlights
Compared with traditional AGM/lead acid batteries, LiFePO4 battery/ Lithium iron phosphate batteries are:
- Higher safety and stability：non-toxic, non-polluting, no rare earth metals, no explosion, no fire.
- Long service life：5000 cycles
- 1/4 lighter than lead-acid batteries.
- The LFP battery can work in a wide temperature range from -20 to +75°C
- No memory effect. Can be charged on demand without loss of capacity.
- Suitable for RV, ship, home storage, telecommunication (base station battery)
Technical Parameters：
|
Model |
TG-51200W/HV |
TG-76800W/HV |
|
|
Standard Voltage |
512V |
768V |
|
|
Module Specification |
102.4V100Ah |
51.2V100Ah |
|
|
Capacity |
100Ah |
100Ah |
|
|
Storage Power |
51.2KWH |
76.8KWH |
|
|
Internal Resistance(AC) |
<200mΩ |
<300mΩ |
|
|
Cycle Life |
≤5000cycles@80%DOD,25C.0.5C |
||
|
Design Life |
10 years |
||
|
Recommend Charge Voltage |
560V±2V |
840V±2V |
|
|
Discharge Cut-off Voltage |
440V±2V |
672V±2V |
|
|
The Max Work Current |
100A |
||
|
Charge Temperature Range |
0°C~60°C |
||
|
Discharge Temperature Range |
-20°C~60°C |
||
|
Storage Temperature Range |
-40°C~55°C@60%t25% Environment Humidity |
||
|
Dimension |
520*510*1510mm |
520*1020*2000mm |
|
|
Weight |
Approx:550kg |
Approx:860kg |
|
|
Communication Method |
RS232-PC,RS485/Canbus-Inverter |
||
|
Certification |
UN38.3. MSDS. UL1973(Cell). IEC62619(Cell) |
||
|
The maximum number of parallel |
4P |
||
We offer a variety of shipping methods: sea, land, air
Attentions：
For safety usage, please be careful on below：
Warning!
1. Do not immerse the battery in water and keep it dry when not in use;
2. Do not knock, throw or affect the battery near a fire source or under extremely hot conditions;
3. Please charge according to the charging requirements;
4. Do not reverse the positive (+) and negative (-) terminals;
5. Do not short-circuit the battery by connecting wires or other metal objects to the positive (+) and negative (-) terminals;
6. Do not directly weld the battery terminals.
